Activity Stream

Clutch cable routing is different from 85 to 86 and the 86 has better piling than the 85

I already took it apart. Just looked at the plug doesn’t look like it was touched. Sent from my iPhone using Tapatalk

What's the spark plug look like? This may be a bit late or swinging for the fence, but does it look like the piston has been kissing it?

I'm not for sure, but I believe that the stators and stator wiring are different. I'm no expert. I've just had the same 1985 since 2003.

That’s awesome I appreciate that thank you! Sent from my iPhone using Tapatalk

when u get your air box. if its missing the filter cage let me know i'll send one out to ya. you've got a 50/50 chance the filter cage is still...

Appreciate the pics. I went ahead and pulled the top end off was the original piston in it. it’s definitely pretty quick I fell on my ass twice doing...

All i could read is 92.5 and the longer nozzle(jet)? had nothing written on it or at least my old eyes cant see them. I'm sure your son will love...

Compare it to a 1980s trx350d carburetor or it’s possibly a later OEM replacement .

I was in denial the whole time hoping it wasn’t in the top end but I could tell when I made the video. Oh well I should be able to sneak one of those...

This......

nope, measured and checked everything before I started. There were multiple test fits before welding in final placement and powder coat There was...

Gonna agree with shortline i think I'd say Run her till she blows or (I hate most chinese products) BUT our zinger has had a china topend for...

Sounds like it’s ready for a top end service to me . Piston slap .

Loose motor mount bolts?

Is your swingarm pivot point going to be to far away from the countershaft ? Not sure if this was brought up yet ?

Here’s the video you can hear the sound pretty good. https://youtube.com/shorts/W1v2803HaL4?si=UAyVLUakR8u7Gwly Sent from my iPhone using...

I tried the puddle trick even during a lightning storm had no such luck haha. I put a new plug so it’s not that the oil injection is blocked off and...

I will check on that. Thank you so much for your response

Thanks! That helps me a lot. I will check into getting a manual. I would like to fix it correctly. I thought it would be an in-depth repair. I will...

HREATV.COM makes them and the collar which every machine has worn out. I donated samples long time ago. His prices were more then fair. Plus he...

Stand in a puddle, grab the spark plug boot wiggle it around while running. Well ok no puddle. A leaking spark could buzz/tick or plug loose perhaps?...

I put my hands all over the plastics i don’t think it’s that. I pushed on the exhaust it didn’t stop the noise. I’ll try and make a video of it. I’ll...

I'd start with checking the plastics for loose fasteners or very near contact with metal parts. That shouldn't take more than applying pressure in...

Yes there’s an O-ring there . Rocker arm pins . For a temporary fix clean the area up really really well and use a little Honda bond on the face ,...

Lots done since last update. Lots more to do. Really turning out pretty slick. Sold 250R redone rear shock as it was too stiff and redid a 300ex...

Haha no it’s an 8” there’s a few rusty 9” ones to the right of that one out of the picture. I had the pull start off the other day I didn’t notice...